Learn about the Advantages of High Pressure Natural Gas
G-TEC Torch Boosters are Easy To Install
Purchase a G-TEC Torch Booster
Torch Boosters are Approved across the US and Canada
Contact G-TEC with questions or to purchase a Torch Booster
TB-15/TB-30 Natural Gas Torch Boosters For Bench Torches And Occasional Casting
What is the right Torch Booster for my shop?
If your shop uses 1 or 2 torches and you don’t do any casting then the TB-15 Torch Booster is the right system for you.
If you have up to 4 torches, or do occasional casting, then you should choose the TB-30 Torch Booster. TB-30 can supply four bench torches at the same time, or 1 casting torch, but not all of them at the same time.
If you have four torches and a casting torch in use at the same time a TB-60 Torch Booster is a better choice. Go to the TB-60 page.
Note: Torch Booster capacities are for the number torches in simultaneous use. Outside of New York City there is no limit on the number of torches that can be connected to a unit
How does a Torch Booster work?
Both systems connect to your low-pressure utility natural gas pipe and boost pressure high enough to make gas flow through a flashback arrestor check valve and give you a hot flame on the torch.
Turn the Torch Booster on in the morning and off at the end of the day and that is all you need to do. Torch Boosters automatically supply the right amount of natural gas - you don’t need to adjust it during the day.
Torch Boosters are quiet and can be installed right next to your jewelers’ benches.
They boost utility natural gas to 25 psi, then you use a regulator to lower pressure to between 3 and 7 psi, which is the recommended pressure for most bench torches. Some jewelers prefer higher gas pressure for casting.
How big is a Torch Booster?
TB-15 and TB-30 Torch Boosters are compact; 12 “ wide, 12” tall and 16” deep. They weigh about 50 lbs.
TB-15 and TB-30 Torch Boosters use 120V 15 amp electrical power.
Both Torch Boosters require a 1/2” utility low pressure natural gas supply pipe.
Learn more about the advantages of high pressure natural gas and a G-TEC Torch Booster
Purchase a TB-15 or TB-30 Torch Booster
There are important reasons why jewelers should have a G-TEC Torch Booster!
OSHA and municipal fire codes require flashback arrestors on any torch that mixes fuel gas and high pressure oxygen.
But in most places city gas pressure is so low that a flashback arrestor will block gas flow - a Torch Booster raises city gas pressure so that you can work safely and get great performance from your torch.
And most jewelers’ torches are designed to work with fuel gas pressure between 3-7 psi but city gas pressure is only ¼ psi. Get better performance from your torch when you use the fuel gas pressure it was designed for!
In many places cylinders of propane or acetylene are prohibited but jewelers use them because they don’t see city gas as a viable option. G-TEC Torch Boosters are permitted everywhere so jewelers get superior performance from natural gas and stay on the right side of the law.
TB-15 and TB-30 Torch Boosters are quiet and can be installed right next to your bench.
Watch Our You Tube Video To Learn More About TB-15 And TB-30 Torch Boosters
Click on our YouTube link to see and hear more about TB-15 and TB-30 Torch Boosters for jewelry manufacturing. Get an overview of how Torch Boosters work, how to turn the system on and off, how to install it, safety features and where to buy your Torch Booster.
Is a Torch Booster quiet enough to use in your shop? The system is running during the entire video - look and hear for yourself!
Scheduled Maintenance - Keeping your TB-15 and TB-30 Torch Booster in top condition is easy. We recommend changing the Filter Drier, Backflow Check Valve and Pressure Limiting Check Valve every 2,000 hours.
Call G-TEC at 1-800-451-8294 to order a TB-15/TB-30 Maintenance Kit.
Click on the YouTube link below to watch a short video showing how to install Maintenance Kit parts.
Learn about the Advantages of High Pressure Natural Gas
G-TEC Torch Boosters are Easy To Install
Purchase a G-TEC Torch Booster
Torch Boosters are Approved across the US and Canada
Contact G-TEC with questions or to purchase a Torch Booster
