Torch Boosters supply high pressure gas directly to torches and burners
Refuelers let you fill G-TEC cylinders with high pressure natural gas
Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi
Purchase a G-TEC Natural Gas Pressure Booster
How To Install your G-TEC System
G-TEC Systems are Approved across the US and Canada
Contact G-TEC if you have questions
Better quality brazing with high pressure natural gas and a G-TEC Natural Gas Pressure Booster
Mike Lang, Welding Director, explains why UA Local 501 switched from acetylene to hi-pressure natural gas for brazing training
Why natural gas is the best fuel gas for brazing
Natural gas has a bulbous flame that has more heat in the secondary flame than acetylene - it wraps the work and distributes heat more evenly around the joint.
More even heating reduces the potential for oxidation defects
Fewer melt-throughs and base metal heat related defects
Braze rod flows more smoothly and fills more completely
Little free carbon in natural gas reduces "fisheye" defects
Less porous brazes
Brazers say a natural gas flame is softer and easier to control
When you switch to high pressure natural gas for brazing keep the torch handle you already have and use a G-TEC mixer, gooseneck and tip combination. G-TEC tips are modular allowing you to mix an assortment of gooseneck lengths and many sizes of single flame and multi flame tips.
G-TEC brazing tips are modular, allowing you to mix gooseneck lengths and single or multi flame tip sizes for the tight fit for your job!
Pick the right G-TEC Torch Booster for your shop...
G-TEC Torch Boosters connect to a standard utility gas pipe and boost pressure as high as 45 psi. Just turn the Torch Booster ON at the start of first shift and OFF at the end of the day - you get an endless supply of high pressure natural gas for your brazing torches. Torch Boosters deliver gas in exactly the same way as a cylinder or bulk tank except that you save money and never run out of gas!
TB-30 Torch Booster - for shops with one oxy-fuel torch TB-30 boosts utility gas pressure at 25 psi at 40 cubic feet of gas per hour. TB-30 measures only 12" wide, 12" tall and 16" deep and is easy to install almost anywhere.
TB-60 Torch Booster - For shops with 2 oxy-fuel torches. TB-60 Torch Booster supplies high pressure natural gas at 60 cf/hr at up to 25 psi.
TB-125 Torch Booster - For shops with 3 or 4 torches. TB-125 Torch Booster raises gas pressure as high as 25 psi and delivers 125 cf of gas per hour.
TB-60 and TB-125 Torch Boosters are in cabinets that measure 20" wide, 16" tall and 18" deep, about the size of a window air conditioner.
TB-250 Torch Booster - When your shop has up to 6 torches TB-250 can boost gas pressure as high as 45 psi and delivers 300 cf of gas per hour. Install a regulator to set pressure between 1-45 psi.
TB-500 Torch Booster - When your shop has up to 12 torches TB-500 is our highest capacity Torch Booster and can raise pressure as high as 45 psi at 500 cf/hr. Install a regulator to set pressure between 1-45 psi.
TB-250 and TB-500 Torch Booster measure 28" wide, 24" deep and 20" tall.
Get more information about TB-250 and TB-500 Torch Boosters.
Do you have more than 12 cutting torches or multiple production stations in your shop?
Good news! Torch Boosters can be connected to a gas manifold to supply multiple cutting tables or production areas.
If you have more than 12 torches then 2 or 3 Torch Boosters can be installed in parallel for greater gas flow volume.
Based on your cutting torch requirements G-TEC will design the right combination of Torch Boosters for you.
Torch Boosters supply high pressure gas directly to torches and burners
Refuelers let you fill G-TEC cylinders with high pressure natural gas
Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi
Purchase a G-TEC Natural Gas Pressure Booster
How To Install your G-TEC System
G-TEC Systems are Approved across the US and Canada
Contact G-TEC if you have questions
