Cutting Tips Banner 1024 x 400 px 2.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

For cutting, brazing or heating G-TEC has the natural gas tip you need to get top performance

G-TEC has natural gas tips for torches by Airco, ESAB, Harris, Meco, Oxweld, Purox, Rego, Smith and Victor

 

Tips for flame cutting with natural gas

DSC06090 Cutting Tips 5x7 100 dpi.jpg

If you have a cutting torch made by Airco, ESAB, Harris, Meco, Oxweld, Puriox, Rego, Smith or Victor you only need to change the tip to a 2-piece natural gas tip - keep the handle and cutting attachment you already use!

G-TEC cutting tips are available in 3 models:

 - Standard Pre-Heat tips have converged straight bore oxygen jets and work with 5-50 psi oxygen pressure

- Extra Pre-Heat tips have a wider flame suface for quick cutting on plate with rust, paint scale of other surface imperfections.

- High Speed tips have converged/diverged bores which help increase cutting speed by up to 20% and provide narrower kerfs.

G-TEC tips are available to cut steel from 1/4" to 12" thick.

Why should you purchase natural gas cutting tips from G-TEC?

- G-TEC natural gas tips feature a thicker shell flange where the shell and internal seal together adding strength and integrity.

- Our tips are machined from ,copper bar stock, not thin tubing used by some OEMs - they last lomger and stand up better with heavy use

- A larger pre-heat diameter puts more heat on the metal for faster heat-up and a quicker start for edge cutting and piercing

 

Tips, Goosenecks and Mixers for brazing with natural gas

DSC06084 STEN Tips 5x7 100 dpi.jpg
DSC06079  TEN Tips 5x7 100 dpi.jpg

G-TEC brazing equipment features a modular design of mixers, goosenecks and tips that are interchangeable for maximum flexibility.

G-TEC Mixers provide the correct oxygen/natural gas ratio for the hottest flame and are specific to each manufacturer's torch handle. Mixers designed for acetylene will not work with natural gas while mixers for propane/propylene may give uneven performance. Get the hottest flame with a G-TEC mixer.

G-TEC Goosenecks - are available in sizes from 3" length to 12" length and fit on the entire range of mixers. G-TEC single flame and multi-flame tips and interchangeable on these goosenecks so you can use the best tip for your task.

G-TEC Multi-Flame Brazing Tips provide a hot, broad flame that wraps tubular fittings to provide even heat that brings the joint to brazing temperature quickly. Wrap around heat means that when the filler metal is applied it will flow farther, fill more completely and reduce the potential for gaps or oxidation defects. Tips are available in sizes from 0 to 10 so they are suitable for the smallest diameter tube up to 4" copper pipe.

G-TEC also has single flame tips for those who prefer that style flame and they are available in sizes from 4-8.

Braze Torch Mixer Gooseneck Tips e.jpg
Dsc06154 Multi Flame Braze Flame EMAIL.jpg
Dsc06155 Single Flame Braze Flame EMAIL.jpg

Multi-flame brazing tips

Single flame brazing tips

Multi-flame tip

Single flame tip

 
DSC06085 Heating Heads PRODUCTION PHOTO Low Res.jpg

G-TEC Heating Heads

G-TEC has a range of Heating Heads capable of delivering from 50,000 to 500,000 BTU per hour for pre/post weld heating, bending and more. Shells are machined from solid copper bar stock and internals are machined from brass then press fit and pinned to prevent separation during a backfire.

# 10 Heating Heads deliver from 50,000 to 110,00 BTU per hour

# 20 Heating Heads deliver from 90,000 to 180,000 BTU per hour

# 30 Heating Heads deliver from 170,000 to 260,000 BTU per hour

# 40 Heating Heads deliver from 240,000 to 290,000 BTU per hour

# 50 Heating Heads deliver from 280,000 to 500,000 BTU per hour

L to R - # 50, # 40, # 30, # 20, # 10 Heating Heads

G-TEC Natural Gas Tips are competitively priced!

G-TEC cutting and brazing tips and heating heads are priced about the same as tips used with other industrial fuels. Call G-TEC at 716-831-9695 for a quote!

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

GTEC_3DLogo_only.tif