Shrink wrap banner.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

High pressure natural gas for your Shrinkfast Heat Tool

Shrink wrap photo.jpg

After employees kept running out of propane for shrink wrapping on the shop floor Kennametal found a solution that never runs out of gas - a G-TEC TB-500 Torch Booster!

When employees used portable propane tanks for shrink wrapping pallets on production lines they kept running out of gas. When a tank ran empty, instead of taking it across the parking lot to fill it up on a cold winter day they would grab the tank on the next line over, and eventually all the tanks were empty!

Now, with a TB-500 Torch Booster hi-pressure natural gas is manifolded throughout the shop, every production line has all the gas they need and no one ever runs out.

Use hi-pressure natural gas with your shrink wrap gun to get top performance, low cost and improved workplace safety. If your shrink wrapping equipment is in a stationary location, such as at the end of a production line or in the shipping department then a G-TEC Torch Booster will provide a continuous supply of fuel gas - never run out in the middle of a job and no empty cylinders to change.

Natural gas is 75% cheaper than propane for equal performance and the danger of storing large amounts of fuel gas in your building is eliminated.

Pick the right G-TEC Torch Booster for your Shrinkfast Heat Tool

If you have one Shrinkfast Model MZ Heat Tool then a G-TEC TB-30 Torch Booster is the right choice.

Dsc08201 Right Side SMALL.jpg
Shrinkfast Model  MZ.jpg

TB-30 Torch Booster - Shrinkfast MZ Heat Tool Demonstration

Click on the video link below to see how the MZ Heat Tool works with high pressure natural gas provided by a G-TEC TB-30 Torch Booster. Note: The S80 title on the video is a pre-production identifier.

Shrinkfast Model 975.png

If you have one Shrinkfast Model 975 or Model 998 Heat Tool then a G-TEC TB-125 Torch Booster is the right system.

Model 975 Heat Tool

TB-125 Front Slight Angle With Fan Drop Shadow 8x10 JPEG.jpg
IMG_9571 Shrinkfast S80 5x3-5 100 dpi.jpg

TB-125 Torch Booster

If you have three Shrinkfast Model 975 Heat Tools, or two  Model 998 Heat Tools then a TB-250 Torch Booster is the right system.

_mg_1264 TB 500 PRINT 4-3 x 3-5.jpg

TB-250 Torch Booster

If you have up to five Shrinkfast Model 975 Heat Tools or three Model 998 Heat Tools then a TB-500 Torch Booster is the right system.

_mg_1264 TB 500 PRINT 4-3 x 3-5.jpg

TB-500 Torch Booster

G-TEC Torch Booster - Shrinkfast Model 998 Heat Tool Demonstration


Click on the video link below to see how the Model 998 Heat Tool works with high pressure natural gas provided by a G-TEC TB-125 Torch Booster.

Shrinkwrap Brochure Image.jpg
Shrink wrap 2.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

GTEC_3DLogo_only.tif