Scrapyard Banner.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

Natural gas cuts through “anything” in a scrap yard, and saves money too!

A Montreal scrap yard switched from propane to natural gas by mounting 7 G-TEC cylinders on a pallet and moving them to wherever they are needed - one pallet cuts for 3 days then the cylinders are refilled overnight. With a Refueler 180 Cylinder Filling System it takes only 4½ hours!

Dsc00232 5 x 7 Scrapyard.jpg
Im000131 8 x 10.jpg
IMG_3256 Cutting 5x7 email.jpg
IM000134.JPG

Natural gas cuts well on ferrous metal (above) or non-ferrous metals with a powder torch (below).

A G-TEC Refueler 180 Cylinder Filling System connects to a standard low pressure utility natural gas pipe and fills Adsorbed Natural Gas Cylinders to 275 psi. Cylinders are manifolded together for a gas supply that can last up to three days before they need to be refilled.

 

And when the cylinders are empty they can be refilled overnight so they are full and ready to go back to work the next morning. Filling  G-TEC Cylinders is automatic and does not need an attendant to monitor the process or turn the Refueler off when the cylinders are full.

A Refueler 180 fills G-TEC cylinders until pressure reaches 275 psi then automatically turns itself off - no operator attention is required!

GTEC_3DLogo_only.tif

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions