Torch Boosters elevate utility natural for direct supply to torches and cutting tables
Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi
Purchase a G-TEC Natural Gas Pressure Booster
How to install your G-TEC system
G-TEC systems are Approved across the US and Canada
Contact G-TEC if you have questions
Refueler 180 Cylinder Filling Systems
Fill Your Own Adsorbed Natural Gas Cylinders
Refueler 180 is a high volume cylinder filling system that makes it simple to take high pressure natural gas across the shop, across town or to a job site. Just connect Refueler 180 to an Adsorbed Natural Gas Cylinder and press the START button to begin the filling process.
Once started filling cylinders is automatic. Cylinders are pressurized to 275 psi and the Refueler 180 turns itself off without operator attention. Many G-TEC customers start the filling process at the end of the day, refill their cylnders over night and begin each day will full natural gas supplies.
Refueler 180 is designed for high-volume operations with many cylinders in use on the shop floor or mounted on fleet trucks. A G-TEC Manifold connects four empty cylinders to a single Refueler 180 and manifolds can be daisy-chained to fill more cylinders at one time.
Cylinders do not need to be completely empty, each cylinder can be at a different level of fullness - they will all be filled together and finish at the same time. Cylinders fill at an average rate of 3 cubic feet per minute.
Typical Applications
G-TEC Refueler 60 Cylinder Filling systems are used wherever fuel gas is used portably. Maintenance and repair shops in large companies take natural gas on the shop floor to repair equipment. Companies that do not have a shop-wide fuel distribution manifold use G-TEC cylinders to take fuel gas each work station for production. Others that do remote work fill cylinders overnight then take full cylinders on their trucks to job sites.
Technical Description and Installation
Refueler 180 is compact, just 28" wide, 24" deep and 20" tall and weighs about 175 pounds. Electrical requirement in North America is 120V 30 amp. An international version for 230V 50 Hz electrical systems is also available.
Refueler 180 is quiet, does not require any special site preparation and can be installed "anywhere" that is consistent with local codes and regulations for cylinder filling. Refueler 180 should be installed indoors in an area where temperatures range between 40-90F / 5-32C.
Click here for more information about how to install a Refueler 180 System.
Technical Specification
Refueler 180 is designed and manufactured for performance, reliability and safety. In the United States it can be operated by anyone who has received proper safety training but does not requires a special license or certificate.
Requirements to operate Refueler 180 may vary in other countries.
Refueler 180 is CE Compliant for use in European Union countries.
Torch Boosters elevate utility natural for direct supply to torches and cutting tables
Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi
Purchase a G-TEC Natural Gas Pressure Booster
How to install your G-TEC system
G-TEC systems are Approved across the US and Canada
Contact G-TEC if you have questions
Torch Boosters elevate utility natural for direct supply to torches and cutting tables
Natural Gas Cylinders hold 130 ccubic feet of natural gas at 275 psi
Purchase a G-TEC Natural Gas Pressure Booster
How to install your G-TEC system
G-TEC systems are Approved across the US and Canada
Contact G-TEC if you have questions
