Jodie Bliss 8 1024 x 350 w text.jpg

Sculpture Bliss Studio

Jodie Bliss - Artist

www.forgeyourbliss.com

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

Hi performance with hi pressure natural gas on your NC Tool Forge

Replace propane with high pressure natural gas right from your standard utility natural gas pipeline!

 

A G-TEC Torch Booster raises utility natural gas service to 6-8 psi for the best performance

from your NC Tool forge

Jodie Bliss.jpg

Hi-pressure natural gas is the right fuel for your forge !

 

When you use high pressure natural gas you will never run out of fuel because you are connected right to the gas utility. No more propane tanks to lug back and forth to refill...you won’t run out of gas in the middle of a task

 

Get that unpleasant propane odor out of your shop

 

If you are in a building where propane is not allowed you should know that G-TEC Torch Boosters are welcomed in buildings that prohibit propane tanks - your Fire Marshal (and your insurance company) will like you better if you have a G-TEC Torch Booster

 

Best of all, for equal heat performance natural gas costs a lot less than propane. If you pay $ 75 for a 100# propane tank it would cost less than $ 20 to get the same heat with natural gas!

Jodie Bliss (photo right) is a metalworking artist in Monument, CO and has used a G-TEC TB-125 Torch Booster with her 3 burner NC Tool Forge for many years.

I love the G-TEC and recommend it to everyone. - Jodie Bliss

Select the right G-TEC Torch Booster for your NC Tool forge...

 

Each burner on an NC Tool forge can use between 29-47 cubic feet of natural gas per hour depending on the pressure setting. Use this chart to determine your gas flow requirement. Multiply the gas consumption per burner times the number of burners on your forge to determine total gas flow demand.

 

Gas pressure to burner - natural gas consumption in cubic feet per hour

 

6 psi   -   29 cf/hr

8 psi   -   33.5 cf/hr

10 psi   -   37.5 cf/hr

12 psi   -   42 cf/hr

15 psi   -   47 cf/hr

 

Many G-TEC customers report excellent performance with their NC Tool Forge with 8 psi gas supply pressure at the forge and the following Torch Booster recommendations are based on 8 psi gas supply from the Booster to the forge . Contact G-TEC at 800-451-8294 to discuss the right Torch Booster if you plan supply pressure greater than 8 psi to your forge.

NC Tool Single Burner.jpg
Dsc08201 Right Side SMALL_edited.png

TB-30 Torch Booster for single burner forges. TB-30 Boosts gas pressure as high as 25 psi with a flow rate of 40 cubic feet per hour. It runs on standard 120V 15 amp power and connects to a 1/2” diameter low pressure gas pipe.

 

Learn more about TB-30 Torch Booster.

NC Tool Two Burner.jpg

TB-60 Torch Booster for two burner forges. TB-60 Boosts gas pressure as high as 25 psi with a flow rate of 60 cubic feet per hour. It runs on standard 120V 15 amp power and connects to a 3/4” diameter low pressure gas pipe.

 

Learn more about TB-60 Torch Booster.

TB-60-Internet-Photo.jpg
NC Tool Three Burner.jpg
TB-125 Front Slight Angle With Fan Drop Shadow 8x10 JPEG.jpg

TB-125 Torch Booster for three burner forges.      TB-125 Boosts gas pressure as high as 25 psi with a flow rate of 125 cubic feet per hour. It runs on standard 120V 20 amp power and connects to a 1” diameter low pressure gas pipe.  

 

Learn more about TB-125 Torch Booster.

NC Tool Logo.jpg

G-TEC Torch Boosters are Certified by CSA International in the United States and Canada for safety reliability and performance and are welcomed in all buildings in both countries, even places where cylinders of propane are prohibited.

CSA Logos.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

GTEC_3DLogo_only.tif