Heavy Duty Fuel Cell Banner.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

1 to 150 psi/10 bar up to 500 cf/hr - 235 lpm  G-TEC can supply your high pressure natural gas requirements

- 50% less expensive than large, outdoor compressors

- CSA Certified, easy permitting process

- Complies with CE Voltage, Electromechanical Compatibility,        Pressure and Machinery Directives

- Ready for immediate use when started, no stored gas

- Simple indoor installation at point of use

When your company is in Phase I or Phase II product development you want a reliable source of high pressure natural gas capable of meeting a wide range of pressure and flow requirements.

 

When testing duty cycles or running evaluations lasting thousands of hours you need a system that will perform reliably for extended time frames.

 

A G-TEC Natural Gas Pressure Booster provides a ready supply of high pressure natural gas in a system that is less expensive to purchase, does not require permitting for installation and simpler to operate.

 

Many natural gas compressors are big and must be installed 

outdoors on a dedicated concrete pad. Extensive piping is required to bring high pressure natural gas to the point where it will be used, adding cost and complexity.

 

By comparison a G-TEC pressure booster is small and can be installed right in the area where high pressure natural gas will be used. There are no special site preparation requirements or costs.

DSC00224 John Cooper 1920 x 500 px.jpg
Outdoor Compressor 4x3 100 dpi.jpg

A G-TEC Pressure Booster is installed indoors right in the are where high pressure natural gas will be used. Pressure Boosters are compact, quiet and do not require special ventilation or other expensive site preparation.

Other compressors are installed outdoors on a concrete pad, require a building permit and cause high pressure piping to be installed in the building.

We have a G-TEC Torch Booster to match your high pressure natural gas requirements

IMG_2894 Front 3-4 Gas Inlet Side Straight On 5x7 w Drop.jpg
TB-125 Front Slight Angle With Fan Drop Shadow 8x10 JPEG.jpg
Dsc08201 Right Side SMALL.jpg
_mg_1264 TB 500 PRINT 4-3 x 3-5.jpg

TB-15/TB-30 Pressure Boosters for pressure up to 25 psi and flow up to 40 cfh

TB-60/TB-125 Pressure Boosters for pressure up to 25 psi and flow up to 125 cfh

TB-250/TB-500 Pressure Boosters for pressure up to 45 psi and flow up to 500 cfh

TB-HVOF Pressure Boosters for pressure up to 150 psi and flow up to 500 cfh

Use a G-TEC Pressure Booster to provide a high-pressure natural gas infrastructure for research and development

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

GTEC_3DLogo_only.tif