Belchfire Banner For Wix.jpg

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

Use high pressure natural gas with your Belchfire torch

LB Steel.jpg

Natural gas costs up to 75% less than propane or propylene for equal BTUs

Natural gas has no withdrawal problems at high flow rates and eliminates valve icing problems

Never change cylinders and never run out of gas with a G-TEC Torch Booster

Natural gas prices are falling and will continue to go down as new technologies increase our national supply. This will be the case as far into the future as we can forecast. You can rely on cheap abundant natural gas being readily available.

US Natural Gas Prices 2008-2022.JPG
BelchfireChart NG tp Propane Propylene savings.jpg

Never change cylinders again and never run out of gas! G-TEC Torch Boosters connect to your low pressure utility natural gas pipe and raise pressure as high as 45 psi. Torch Boosters supply high pressure natural gas as it is used. There are no storage tanks to fill and the Torch Booster is ready to use as soon as it is turned on.

Because natural gas is always a gas and not a liquid there are never problems with high flow rates or valve icing - Torch Boosters can run 24 hours a day for big heating jobs!

Make your workplace safer by getting propane tanks out of the building and bulk tanks off of your property. Torch Boosters do not store and gas and let you eliminate dangerous high volume gas storage.

DSC00216 Inlet gas connection275 px x 500 px.jpg

OR

Stored Acetylene Cylinders.jpg
Propane Bulk Tank.jpg

Choose from three G-TEC Torch Boosters to fuel your Belchfire torch

TB-125 Front Slight Angle With Fan Above 8x10 Drop Shadow 100 dpi for web.jpg

TB-125 Torch Booster

Boost low pressure utility gas as high as 25 psi with a flow rate of 125,000 BTU/hr

Learn more about TB-125 Torch Booster

_mg_1264 TB 500 PRINT 4-3 x 3-5.jpg

TB-250 Torch Booster

Boost low pressure utility natural gas to 45 psi with a flow rate up to 300,000 BTU per hour. 

Learn more about TB-250 Torch Boosters

_mg_1264 TB 500 PRINT 4-3 x 3-5.jpg

TB-500 Torch Booster

Boost low pressure utility natural gas to 45 psi with a flow rate up to 500,000 BTU per hour

Learn more about TB-500 Torch Boosters

Choose the right G-TEC Torch Booster for your heating requirements

Belchfire Mono Torch.jpg

Belchfire Mono Torch

Performs well with natural gas pressure from 5 to 30 psi

5 psi - 196,800 BTU/hr - Select TB-250 or TB-500

10 psi - 225,600 BTU/hr - Select TB-250 or TB-500

15 psi - 316,800 BTU/hr - Select TB-250 or TB-500

20 psi - 338,400 BTU/hr - Select TB-500

25 psi - 388,800 BTU/hr - Select TB-500

30 psi - 448,800 BTU/hr - Select TB-500

Belchfire Model C Natural Gas  / Compressed Air Torch

The Belchfire Model C Torch requires a TB-500 Torch Booster for maximum heat output

Belchfire Tube Burner.png
Belchfire  Model C Torch.jpg

At 30 psi natural gas pressure and 50 psi compressed air pressure the Model C torch will produce 556,800 BTU per hour.

Belchfire Tube Burner

_MG_8039 Torches Lit 5x7 100 doi.jpg

Each burner on the Belchfire Tube Burner is 40,000 BTU/hr

TB-125 Torch Booster is the right choice for up to 3 burners

TB-250 Torch Booster is the right choice for up to 7 burners

TB-500 Torch Booster is the right choice for up to 12 burners

Torch Boosters supply high pressure gas directly to torches and burners

Refuelers let you fill G-TEC cylinders with high pressure natural gas

Natural Gas Cylinders hold 130 cubic feet of natural gas at 275 psi

Purchase a G-TEC Natural Gas Pressure Booster

How To Install your G-TEC  System

Contact G-TEC if you have questions

GTEC_3DLogo_only.tif