TB-250 & TB-500 Torch Boosters

TB-250 and TB-500 Torch Boosters supply high pressure natural gas at up to 45 psi with a flow rate up to 250 scfh (250,000 BTU) or 500 scfh (500,000 BTU) from a ¼ psi utility natural gas supply. With higher pressure utility supply greater flow rates as high as 900 scfh are possible.

Typical applications for the TB-250 Torch Booster include up to 8 standard flame cutting or brazing torches, up to 4 Messer ALFA torches, 2 Shrinkfast Model 975 Heat Tools or 1 Model 998 Heat Tool, NC Tool Forge with up to 8 burners or a Belchfire Mono Torch and up to 4 ham torches.

Typical applications for the TB-500 Torch Booster include up to 16 standard flame cutting or brazing torches, up to 10 Messer ALFA torches, 4 Shrinkfast Model 975 Heat Tools or 2 Model 988 Heat Tools, an NC Tool Forge with up to 12 burners, Belchfire Mono or Model C torches and up to 8 ham glazing torches.

TB-250 and TB-500 Torch Boosters are used in many other applications where gas flow requirements fall within 1-45 psi and up to 500 scfh gas flow.

A Torch Booster is easy to use...just turn it on and get all the gas you need. When your torch is not lit the Torch Booster automatically goes into recirculation mode.

They are designed to be left running for short periods when torches are not being used and do not require operator attention as torches are turned on and off.

TB-250 and TB-500 Torch Boosters elevate gas pressure as high as 45 psi although higher pressures are possible by special order. If your production cycle is around the clock, your work area temperature exceeds 90F, or you are using gas at pressure higher than 60 psi you should consider the TB-250C/TB-500C or TB-250H / TB-500H Systems that incorporate a compressor cooling system. Click here for more information about Heavy Duty Torch Boosters.

Both systems measure 28” W x 24” D x 20” T; TB-250 weighs 175 lbs. and TB-500 weighs 285 lbs. In North America electrical requirements are 208V, 60Hz, 30 amp service; worldwide 230V, 50Hz, 30 amp service. Gas supply should be between ¼ to 5 psi and delivered in a 1 1/2” pipe which connected directly to the Torch Booster.

TB-250 and TB-500 Torch Boosters are Certified by CSA International, CE Compliant and are permitted in buildings that prohibit gases in cylinders, such as acetylene and propane.


Contact G-TEC for a Price Quote

1-800-451-8294 / info@gas-tec.com


- Additional Links -

TB-250/TB-500 Page On The Desktop Website

Torch Boosters

Refueler Cylinder Filling Systems

Adsorbed Natural Gas Cylinders

Applications For High Pressure Natural Gas

Certifications And Approvals

How To Order A G-TEC System

Mobile Website Home Page

G-TEC Desktop Website

1-800-451-8294 - info@gas-tec.com