G-TEC natural gas cylinders have many advantages compared to the cylinder you use
today -
- No 15 psi limit - set your torch to draw natural gas at any psi
- No icing problems at high withdrawal rates
- Standard CGA 510 valve lets you use the regulator you already own
- G-TEC cylinders can be used and transported in any position, even lying down
- Refill your cylinders whenever supplies run low
- Anyone can use a Refueler to fill G-TEC cylinders - no special license or certificate
is required
Make your workplace safer -
G-TEC cylinders are safer than acetylene or LPG cylinders - safer than whatever cylinder
you
use today. During testing full G-TEC cylinders were shot with bullets near an open
flame but did not catch fire or explode. Full cylinders were detonated with half
sticks of dynamite but did not rupture
or explode. G-TEC cylinders reduce the risk of accidents from carelessness or ignorance
and make your workplace safer.
G-TEC manufactures Adsorbed Natural Gas cylinders in three sizes -
- NG-14 cylinders hold 14 cubic feet of natural gas and are perfect for light duty
jobs
- NG-45 cylinders hold 45 cubic feet of natural gas and are the right choice for moderate
daily use.
- NG-130 cylinders hold 130 cubic feet of natural gas and will supply your cutting
torch all day
- G-TEC cylinders are DOT A
pproved in the United States
Now the advantages of high-pressure natural gas are portable - G-TEC Adsorbed Natural
Gas Cylinders let you take 275 psi natural gas anywhere!
G-TEC cylinders are available in
14 cubic foot (NG-14, left), 130 cubic foot (NG-130,center) and 45 cubic foot (NG-45,right)
sizes.
Approved in the United States
by the Department of Transportation
Approved in Canada
by Transport Canada
Physical Characteristics
NG-14
Capacity - 14 cubic feet
Height - 23.5”
Diameter - 6”
Weight - 25 LB
CGA 510 female valve
NG-45
Capacity - 45 cubic feet
Height (with cap) - 39.5”
Diameter - 8”
Weight - 57 LB
CGA 510 female valve
NG-130
Capacity - 130 cubic feet
Height (with cap) - 48.5”
Diameter - 12”
Weight - 130 LB
CGA 510 female valve
Construction
G-TEC cylinders are built to US Department of Transportation 4B300 and 4BA300 specifications.
Each cylinder features a 450 psi spring loaded relief valve and 212F fusible plug.
Valve fitting is CGA 510 for a standard regulator . NG-130 and NG-45 include a screw-on
valve cap. NG-14 has a valve protection collar. Cylinders are filed with adsorbent
activated charcoal.
Certification Requirements
G-TEC cylinders require a visual inspection by a certified inspector every 10 years
(5 years in Canada). No hydrostatic test is required. Inspect for dents, corrosion,
gouges, bulges and other safety related defects.
